EIRICH mixer for the University of Cambridge

The performance of the compulsory mixer with rotating mixing pan and eccentrically arranged mixing tool, known as an Eirich mixer, has been described in many publications in various industries as the best available mixing technology.

EIRICH observes an increasing demand for mixers for fibre concretes

For many applications, fibres are added to concretes, especially to improve the cracking and fracture behavior. The brittleness of the concrete matrix decreases when fibres are added, making the concrete more ductile and better able to resist bending stresses.

EIRICH preparation technology in the recovery and recycling of dumpsite materials

During the smelting of raw ore materials, dusts are produced that still contain small amounts of metals. In the past, these dusts were dumped in overground storage sites. For a long time it was not a commercially viable proposition to recover the remaining metals from these waste materials, partly because of the relatively low metal prices.

Large zeolite manufacturer in China optimizes production with granulation technology from EIRICH

The company has been manufacturing synthetic zeolite powders since 2002. The company has earned a good reputation among its customers in the areas of air separation and purification, petrochemical & refining, and the painting & coating industry.

German chamotte specialist invests in preparation technology from EIRICH

Chamotte products are made from refractory clay and chamotte, which consists of calcined clay. They are among the oldest refractory materials, with application limits extending to above 1400°C depending on the Al2O3 content.

Submission phase for Gustav Eirich Award ends in May

The Gustav Eirich Award will be awarded every year to scientists in the refractory industry. Together with ECREF we are proud to present the prize at Feuerfest Kolloquium in Aachen, Germany. Take the next chance and submit your dissertations (Ph.D. theses) until 20 May 2020.

Technical University of Denmark joins the ranks of devotees of EIRICH mixing technology

Since the introduction in 2005 of the “mixer with sequence automation and process data control,” initially known as the “mixer with university control,” more than 50 institutions around the world have utilized this technology in their mixers.

When it comes to facing concrete, EIRICH delivers on other mixer manufacturers’ promises

Just like in all other areas of technology, fundamental changes and innovations have also made their way into the world of mixing technology over the last 150 years.

First 5000-liter EIRICH mixer for the precast parts industry in the Singapore region

The market for precast concrete parts is booming in Southeast Asia, with acceptance also high in the private housing construction sector. Quality demands are such that state-of-the-art technology is required for production. Poh Cheong from Singapore has modernized its factory in Malaysia – with mixing technology from EIRICH.

A popular choice: EIRICH systems for the preparation of compounds for graphite electrodes

In the production of compounds for graphite electrodes, coke is mixed with pitch and additives at temperatures around 180°C. This process is a key factor in determining the quality of the final product; as well as optimizing the mixing of all the recipe ingredients, it is necessary to fill the pores of the coke as best possible with pitch and to coat each and every coke particle with pitch.